SAS Audio Labs, amplifier preamplifier design problems

SAS Audio Labs Amplifier Preamps

"Where Music Comes Alive" TM

Hardwiring, Layout Problems | Solutions To These Problems | Power Supplies, and Capacitors | Interstage Signal Feedback Through the Power Supply | Resistor comparisons

Home Page | Reviews | Tube Amplifiers | Tube Preamplifiers | DIY Parts/Price list | Warranty | Specials | Contact, Directions
Audio Links | NEW: Forum

tube preamp

SAS Audio Labs Amplifier Preamps White Papers Introduction:

Every tube amplifier and tube preamplifier incorporates basic concepts; each of which have benefits and shortcomings in musical reproduction. Our goal is to improve on the weaknesses of these concepts and to produce better, more accurate music.

In these white papers, we shall discuss layout, wiring and PC boards, soldering, power supplies, capacitors, resistors, hidden feedback, and their effect on music. We hope you come away thinking more about the importance of the component's entire design. Simply upgrading parts is important, and often helpful, but limited as the entire basic design philosophy must be considered if optimum sound is to be obtained.

Our goal is to improve the sonic accuracy over those of today and also of yesteryear.

The next page "Hardwiring and Layout Problems:" will explain further.

SAS Audio Labs

Steve Sammet
503 W Jefferson St #2
Morton, Illinois USA 61550
Tel: (309) 263-0736
1:00 PM - 6:00 PM CST Mon-Fri

* tm, sas audio labs, SAS Audio Labs,
SAS AUDIO LABS, and the SAS AUDIO LABS banner are trademarks of SAS Audio Labs."
Copyright&Copy: 12-28-1996 Updated: 05-12-2016. All contents of this article, including graphics, components, component layouts, "lead to lead wiring", "Where Music Comes Alive" are copyrighted.
All rights reserved.No portion of this article may be reproduced without the written permission from
Steve A. Sammet at SAS Audio Labs. SAS Audio Labs is registered with the state of Illilnois.